There’s no simple answer to that question. Many factors can contribute to oil consumption, and correctly diagnosing if there is a problem and what’s causing it can save you a lot of money and downtime. All engines will consume some amount of oil, and as an engine ages and wears we generally accept increases in consumption, but in low mileage or low hour engines oil consumption can be frustrating. Letting an engine with truly high oil consumption go unchecked can result in shortened engine life and/or engine failures.
External oil leaks are the easiest to identify and shouldn’t be underrated. A few small external leaks can add up to a considerable amount of oil over time, and obviously, these can lead to safety concerns.
Internal oil leaks that allow oil into the combustion chamber from rings not seating due to improper break-in procedures, incorrectly installed rings, leaking turbo seals, worn valve train components, etc…are harder to identify and more expensive to repair. It’s not always major problems, something as simple as: a failing air compressor, wrong type/weight of oil, or overfilling the crank case can cause oil consumption.
Before an engine would be disassembled a study should be done to track the actual amount of oil usage and determine if the engine truly is consuming questionably high amounts of oil. There are different methods to calculate excessive oil consumption. Some deal with calculations involving load factors and BSCO (brake specific oil consumption) and grams per brake horsepower hour (g/bkW-h) or pounds per brake horsepower hour (lb/bhp-h). Combining the O.E. information, we’ve found the simplest guideline we’ve developed is shown in the chart below. This chart compares the engine’s fuel usage in comparison to its oil consumption. Oil usages should be recorded over at least two consecutive regular service oil change periods to determine a reliable baseline.
Guideline for questionable consumption ranges:
There are conditions and circumstances where engines falling in this questionable range could still be within acceptable limits.
Obviously, operating conditions can play major roles and consideration must be given to things like:
Taking the time to investigate and understand the problem can save you time and money. In some applications and environments the demands placed on the engine can contribute to the additional oil consumption and additional “repairs” to the engine may not produce improvements.
The guidelines above were developed as a reference. Refer to the latest O.E. manufacturer’s bulletins and publications for more information.
If you’re an existing customer and already have a login, click here to find IPD quality parts.
If you would like to find an IPD distributor or become an IPD distributor, please fill out our form.
